LOEWE CT1163
Instrukcja Obsługi

Daily operation of the set � adjusting the sound/mono/stereo, 2 sound

Adjusting treble: Mark the �Treble� line

�

+

Adjust

Adjusting the treble Press the Sound functions button several times to mark <Treble>. Increase or reduce the treble with the � + buttons.

�Nicam� sound norm The TV set must be equipped with a Nicam decoder in order to receive the Nicam sound norm. Stations with the �Nicam� sound norm can be received in England, Belgium, Spain, Sweden and France. The set switches automatically to the Nicam norm for Nicam sound broadcasts. If the station broadcasts stereo sound, the display <Stereo> appears, for two-sound broadcasts <Sound 1> and for mono broadcasts <Nicam>. If you want to listen to a stereo broadcast in mono, e.g. because there is some interference, switch the sound function from <Stereo> to <Mono!>. 1. Press the Sound functions button until <Stereo> is marked in white. 2. Press the buttons � or + briefly, display <Mono!>. This adjustment is retained until you switch back over to <Stereo>. If you want to know whether the station is broadcasting in Stereo, Mono or 2 Sound, press the TV button briefly. Stereo, Nicam or 2 Sound appears on the screen next to the program name. For 2 Sound broadcasts you can mark the <Sound1> or <Sound2> line by pressing the button and select the desired sound with the � or + buttons. The displayed sound functions disappear again automatically after a few seconds or press the TV button again.

Switching from stereo to mono: Select �Stereo� line

�

+

Adjust �Mono !�

Switching from stereo to mono The set switches automatically to stereo when it receives a station with stereo sound. However, if you still want to listen to the sound in mono: Press the Sound functions button until <Stereo> is marked. You can switch to <Mono!> with the � + buttons.

Treble Bass

+6 -3

Mono !
AVC Volume 23 on

Two sound broadcast, Sound 1 or Sound 2

�

+

Adjust �Sound 2�

Two sound broadcast If you switch to a program with two-sound transmission, <2 Sound> is displayed in addition to the program name. You can choose between the main language Sound 1 and the foreign language Sound 2. Select <Sound 1> by pressing the Sound functions button several times, switch over to <Sound 2> with the + or � buttons.

Treble Bass

+6 -3

Sound 2
AVC Volume on 23

26